A sump
pump is the best defence against flooding in your Aussie basement. When
buying the pump in Australia, you need to consider several features. Knowing
the key components of the pump will give you ample time when choosing the ideal
pump for your needs.
Sump liner
This
is an airtight lid since an open sump pit is ugly, hazardous and prone to clogging.
The pump system is housed in a durable sump liner. The finished installation is
made in such a way that it fits flush with the basement floor.
Water level alarm and floor
drain
The
sump liner contains a one-way floor drain, in case the water needs to drain
into the liner. The battery-powered alarm is built into the top. The alarm
sounds automatically if the level of water in the liner rises above the top of
your pump.
Reliable float switch
Your
sump
pump supplierin Australia should be able to provide you with the float
switch. The float switch will not malfunction, unlike ball-on-wire switches
that are prone to snagging and jamming. With a high-quality float switch, the
pump will always know when to pump.
Pump stand
Your
pump rests on a pedestal that is specially designed to prevent small objects
from clogging the pump’s intake.
Battery backup
You
should install a system in Australia that comes with a battery backup to keep
your system functioning all the time even when there is a power outage.
Check valve
The
check valve is typically installed on the drain line. It prevents water from
flowing back into the pump since it is a one-way valve.
If
you are looking forward to buying a sump pump in Australia, the
components discussed in this post are essential and you need to look for them.
Discuss with your supplier anything that you do not understand.
Comments
Post a Comment