Australian water
quality testing
should be done on both untreated and treated water. Most water supplies need
some degree of treatment. Testing the quality of untreated water sources is
crucial as it helps people understand the water quality problems that exist and
the right measures to take to treat the water.
Testing
water after treatment is also important as it ensures that the treatment system
is functioning as designed. It also ensures the safety of drinking water
supplied to a remote and rural location. It is important to test the treated
water at the same time as the untreated water. Problems should be addressed
promptly and records kept. In case of a water quality concern, consult a doctor
or a local public health inspector for more information on how it may have
affected people who consumed the water.
Treated water suite
During
water
quality testing near mein Australia, the treated water suite is focused
to track source water quality problems for the purpose of managing water
treatment. The recommended parameters are those where problems were found from
the level C diagnostic suite. Here are some of the parameters targeted.
Total coliform
This
parameter identifies any potential microbial contamination. The water should be
tested again if any total coliform is detected.
Conductivity and total
dissolved solids
This
parameter identifies significant TDS changes that may identify a change in the
quality of water. It also helps to track and determine the reason for such
changes and make sure the treatment process is not affected by any change.
Turbidity
At
the time sampled, the turbidity testing should be similar. In case the value
differs, this may be an indication that groundwater is influenced by surface
water or flooding.
It
is, therefore, important to do Australian water quality testing
after treating the water for the full diagnostic suite. This is a great measure
to safeguard health.
Comments
Post a Comment